MT-10/0.4-2 X 1600
Designed for receiving 10 kV, 50 Hz electrical power and transforming it to 0.4/0,8 kV voltage for distribution to users; this is an outdoor service transformer substation connected to external networks via underground cables.
| Dimensions (H.W.D.), mm | |
|---|---|
| Number of transformers | |
| Transformer rated voltage MV/LV, kV | |
| Transformer rated voltage MV/LV, kV | |
| Rated frequency: | 50Hz |
| Degree of protection: | |
| Altitude above sea level: | |
| Ambient temperature: | |
| Relative humidity: | ≤ 100% (at +25°C) |
| Ventilation: | Passive (natural convection) / Active (mechanical forced ventilation) |
| Standards: | LST EN 62271-202 |
| 10 kV voltage compartment | — |
| 10 kV Vardinė įtampa | 10 kV |
| 10 kV Maksimali įtampa | 12 kV |
| 10 kV Bandymo įtampa (50Hz, 1 min.) | 28 kV |
| 10 kV Vardinis dažnis | 50 Hz |
| 10 kV Impulsinė bandymo įtampa (1,2/50μs) | 75 kV |
| 10 kV Narvelio aptarnavimas | External |
| 10 kV Narvelio izoliacija | Oras |
| 10 kV Tinklo neutralė | Isolated |
| 10 kV Narvelio apsaugos laipsnis | IP3X |
| 10 kV Aptarnavimo kategorija | LSC2A |
| 10 kV Skyrikliai | According to AB 'ESO' technical requirements |
| 10 kV Viršįtampių ribotuvai | According to AB 'ESO' technical requirements |
| 0,4 kV įtampos skyrius | — |
| 0,4 kV šynų vardinė srovė | ≥1600 A |
| 0,4 kV šynų trumpo jungimo srovė | 25 kA |
| 0,4 kV šynų smūginė srovė | 40 kA |
| 0,4 kV dalies aptarnavimas | Vienpusis – išorinis |
Basic Information
Enclosure:
The substation consists of a reinforced concrete foundation and a metal enclosure with a removable roof. The substation is divided into six sections separated by partitions: two 10 kV compartments, two power transformer compartments, two 0.4/0.8 kV compartments.
10 kV voltage compartment
Rated voltage: 10 kV
10 kV
Maximum voltage:
12 kV
Test voltage (50Hz, 1 min):
28 kV
Rated frequency:
50 Hz
Impulse test voltage (1.2/50 μs):
75 kV
switchgear compartment maintenance:
External
Gas-Insulated Switchgear insulation:
Oras
Network neutral:
Isolated
Degree of protection:
IP 3X
Service category:
LSC2A
0.4 kV voltage compartment
Rated current of 0.4 kV busbars:
≥1600 A
Short-circuit current of 0.4 kV busbars:
25 kA
Peak short-circuit current of 0.4 kV busbars:
40 kA
Maintenance of 0.4 kV section:
One-sided - external
Additional information
Medium voltage:
Sumontuoti su hermetizuoto oro vidutinės įtampos skirstyklomis; vieta TSPĮ.
Transformer:
Two sites with oil collection pits , three phases, for hermetic oil-immersed transformers; (≤1500x1000x1800mm) up to 1600 kVA.
Low voltage:
Two busbar sections; Two incoming fuse-switch blocks and/or automatic circuit breakers; Sectional fuse-switch block and/or automatic circuit breaker; Space for control metering; Space for commercial metering (KAS); Designated space for linear fuse-switch blocks and/or automatic circuit breakers; Aluminum (Al) or Copper (Cu) busbars with pressed-in bushings (for convenient mounting of fuse-switch blocks); Auxiliary panel (SRS).
Grounding conductors:
Transformer construction: 10 mm²; Doors: 4 mm².
Internal use panel
Plug socket ~230V with grounding contacts, protected by RCCB and 1-phase C16A circuit breaker; 1-phase C6A circuit breaker for protection of 10 kV short-circuit indicator power supply; 1-phase C6A circuit breaker for lighting protection; 1-phase C16 circuit breaker for protection of TSPĮ equipment power supply.
Verification metering
One location (three-phase) is allocated for the control electrical metering device and test terminal in the 0.4/0,8 kV distribution equipment compartment; upon order, current transformers are installed and connected.
Equipment details:
The power transformer is loaded from the top by removing the roof. The transformer is placed on wheels into designated fixed positions that prevent movement. MV – Medium Voltage compartment with equipment; LV – Low Voltage compartment with equipment; KAS – Commercial metering.
MT-10/0.4-2 X 1600
Basic Information
Enclosure:
The substation consists of a reinforced concrete foundation and a metal enclosure with a removable roof. The substation is divided into six sections separated by partitions: two 10 kV compartments, two power transformer compartments, two 0.4/0.8 kV compartments.
| Dimensions (H.W.D.), mm | |
|---|---|
| Number of transformers | |
| Transformer rated voltage MV/LV, kV | |
| Transformer rated voltage MV/LV, kV | |
| Rated frequency: | 50Hz |
| Degree of protection: | |
| Altitude above sea level: | |
| Ambient temperature: | |
| Relative humidity: | ≤ 100% (at +25°C) |
| Ventilation: | Passive (natural convection) / Active (mechanical forced ventilation) |
| Standards: | LST EN 62271-202 |
| 10 kV voltage compartment | — |
| 10 kV Vardinė įtampa | 10 kV |
| 10 kV Maksimali įtampa | 12 kV |
| 10 kV Bandymo įtampa (50Hz, 1 min.) | 28 kV |
| 10 kV Vardinis dažnis | 50 Hz |
| 10 kV Impulsinė bandymo įtampa (1,2/50μs) | 75 kV |
| 10 kV Narvelio aptarnavimas | External |
| 10 kV Narvelio izoliacija | Oras |
| 10 kV Tinklo neutralė | Isolated |
| 10 kV Narvelio apsaugos laipsnis | IP3X |
| 10 kV Aptarnavimo kategorija | LSC2A |
| 10 kV Skyrikliai | According to AB 'ESO' technical requirements |
| 10 kV Viršįtampių ribotuvai | According to AB 'ESO' technical requirements |
| 0,4 kV įtampos skyrius | — |
| 0,4 kV šynų vardinė srovė | ≥1600 A |
| 0,4 kV šynų trumpo jungimo srovė | 25 kA |
| 0,4 kV šynų smūginė srovė | 40 kA |
| 0,4 kV dalies aptarnavimas | Vienpusis – išorinis |
10 kV voltage compartment
Rated voltage: 10 kV
10 kV
Maximum voltage:
12 kV
Test voltage (50Hz, 1 min):
28 kV
Rated frequency:
50 Hz
Impulse test voltage (1.2/50 μs):
75 kV
switchgear compartment maintenance:
External
Gas-Insulated Switchgear insulation:
Oras
Network neutral:
Isolated
Degree of protection:
IP 3X
Service category:
LSC2A
0.4 kV voltage compartment
Rated current of 0.4 kV busbars:
≥1600 A
Short-circuit current of 0.4 kV busbars:
25 kA
Peak short-circuit current of 0.4 kV busbars:
40 kA
Maintenance of 0.4 kV section:
One-sided - external
Additional information
Medium voltage:
Sumontuoti su hermetizuoto oro vidutinės įtampos skirstyklomis; vieta TSPĮ.
Transformer:
Two sites with oil collection pits , three phases, for hermetic oil-immersed transformers; (≤1500x1000x1800mm) up to 1600 kVA.
Low voltage:
Two busbar sections; Two incoming fuse-switch blocks and/or automatic circuit breakers; Sectional fuse-switch block and/or automatic circuit breaker; Space for control metering; Space for commercial metering (KAS); Designated space for linear fuse-switch blocks and/or automatic circuit breakers; Aluminum (Al) or Copper (Cu) busbars with pressed-in bushings (for convenient mounting of fuse-switch blocks); Auxiliary panel (SRS).
Grounding conductors:
Transformer construction: 10 mm²; Doors: 4 mm².
Internal use panel
Plug socket ~230V with grounding contacts, protected by RCCB and 1-phase C16A circuit breaker; 1-phase C6A circuit breaker for protection of 10 kV short-circuit indicator power supply; 1-phase C6A circuit breaker for lighting protection; 1-phase C16 circuit breaker for protection of TSPĮ equipment power supply.
Verification metering
One location (three-phase) is allocated for the control electrical metering device and test terminal in the 0.4/0,8 kV distribution equipment compartment; upon order, current transformers are installed and connected.
Equipment details:
The power transformer is loaded from the top by removing the roof. The transformer is placed on wheels into designated fixed positions that prevent movement. MV – Medium Voltage compartment with equipment; LV – Low Voltage compartment with equipment; KAS – Commercial metering.
