KP-6/10
Designed for receiving and distributing 6–10 kV, 50 Hz electrical power using switching devices; Installed medium voltage equipment configurable with linear power switch compartments, linear vacuum switch compartments, and compartments with measuring transformers for commercial metering; This is an outdoor service device connected to external networks via underground cables; Complies with AB ‘ESO’ technical requirements.
| Dimensions (H.W.D.), mm | |
|---|---|
| Rated operational voltage (Ue) | ≤ 10kV |
| Rated frequency (fn) | 50 Hz |
| Degree of protection (IP) | IP44 |
| Altitude above sea level | ≤ 1000 m |
| Ambient temperature | -35…+40°C |
| Relative humidity | ≤ 100% (at +25°C) |
| Ventilation | Passive (natural convection) / Active (mechanical forced ventilation) |
| Standards | LST EN 62271-202 |
| 10 kV section | — |
| 10 kV Vardinė įtampa | 10 kV |
| 10 kV Maximum voltage: | 12 kV |
| 10 kV Test voltage (50Hz, 1 min): | 28kV |
| 10 kV Vardinis dažnis, Hz | 50 Hz |
| 10 kV Impulse test voltage (1.2/50 μs): | 75 kV |
| 10 kV switchgear compartment maintenance: | External |
| 10 kV Switchgear insulation: | Air insulation |
| 10 kV Degree of protection: | IP3X |
| 10 kV Service category: | LSC2A |
| 10 kV Disconnectors | According to AB 'ESO' technical requirements |
| 10 kV Surge arresters | According to AB 'ESO' technical requirements |
Optional accessories
KP-6/10
| Dimensions (H.W.D.), mm | |
|---|---|
| Rated operational voltage (Ue) | ≤ 10kV |
| Rated frequency (fn) | 50 Hz |
| Degree of protection (IP) | IP44 |
| Altitude above sea level | ≤ 1000 m |
| Ambient temperature | -35…+40°C |
| Relative humidity | ≤ 100% (at +25°C) |
| Ventilation | Passive (natural convection) / Active (mechanical forced ventilation) |
| Standards | LST EN 62271-202 |
| 10 kV section | — |
| 10 kV Vardinė įtampa | 10 kV |
| 10 kV Maximum voltage: | 12 kV |
| 10 kV Test voltage (50Hz, 1 min): | 28kV |
| 10 kV Vardinis dažnis, Hz | 50 Hz |
| 10 kV Impulse test voltage (1.2/50 μs): | 75 kV |
| 10 kV switchgear compartment maintenance: | External |
| 10 kV Switchgear insulation: | Air insulation |
| 10 kV Degree of protection: | IP3X |
| 10 kV Service category: | LSC2A |
| 10 kV Disconnectors | According to AB 'ESO' technical requirements |
| 10 kV Surge arresters | According to AB 'ESO' technical requirements |
Enclosure:
KP sudaro gelžbetoninis pamatas ir metalinis korpusas su nukeliamu stogu. KP susideda iš dviejų pertvaromis atskirtų dalių: 6-10kV skyriaus ir valdymo skyriaus.
Medium voltage:
Sumontuoti su oro izoliacija standartus LST EN 62271-1, LST EN 62271-100, LST EN 62271-200 atitinkančios SCHNEIDER ELECTRIC SM6, ABB UniSwitch (arba kitų gamintojų oro izoliacijos) skirstyklos; vieta TSPĮ skydo montavimui.
Low voltage:
Self-use shield (SRS).
Auxiliary power supply cabinet (SRS):
Kištukinis lizdas ~230V su įžeminimo kontaktais, apsaugotas RCCB ir automatiniu jungikliu 1f C16A; Automatinis jungiklis 1f C6A skirtas 10kV trumpo jungimo indikatorių maitinimo apsaugai; Automatinis jungiklis 1f C6A šviestuvų apsaugai; Automatinis jungiklis 1f C16 TSPĮ įrangos maitinimo apsaugai.
