ESS-140.70.28-X
Designed for distribution of three-phase ~400V voltage, 50Hz frequency electricity, transit lines and their protection against overloads and short circuits; 185mm busbar system is prepared in the module of the cable section; The module of the cable section is suitable for installation of vertical fuse-breaker units of many manufacturers; Suitable for operation in indoor and outdoor environments; Conforms to the technical requirements of AB "ESO".
| Dimensions (H.W.D.), mm | |
|---|---|
| Nominal voltage: | ≤ 400V |
| Rated current: | 400A, 630A |
| Rated frequency: | 50Hz |
| Degree of protection: | |
| Mechanical resistance: | IK10 |
| Short-circuit current Icw: | ≤ 10kA |
| Altitude above sea level: | |
| Ambient temperature: | |
| Relative humidity: | ≤ 100% (at +25°C) |
| Ventilation: | Passive |
| Mounting: | On the plinth, on a recessed foundation |
| Standards: | LST EN 10346, LST EN 61439-1, LST EN 61439-5 |
Optional accessories
You may also like…
Related products
ESS-140.70.28-X
| Dimensions (H.W.D.), mm | |
|---|---|
| Nominal voltage: | ≤ 400V |
| Rated current: | 400A, 630A |
| Rated frequency: | 50Hz |
| Degree of protection: | |
| Mechanical resistance: | IK10 |
| Short-circuit current Icw: | ≤ 10kA |
| Altitude above sea level: | |
| Ambient temperature: | |
| Relative humidity: | ≤ 100% (at +25°C) |
| Ventilation: | Passive |
| Mounting: | On the plinth, on a recessed foundation |
| Standards: | LST EN 10346, LST EN 61439-1, LST EN 61439-5 |
Basic Information
Enclosure:
Galvanized sheet steel DX51D+Z275, 1.5 mm thick, painted in standard RAL7032 color (other options available according to the project).
